How to use Xiaomi Mi Flash Tool
Step 1: Download and install the latest version of Xiaomi Flash Tool on your Computer.
Step 2: Download the Fastboot ROM for your Xiaomi Device from here and extract it on your Computer.
Step 3: Power Off your device.
Step 4: Press and hold
Volume Down (-) and Power key at the same time for few seconds to boot into Fastboot Mode.
Step 5: Once you have booted into
Fastboot Mode, you will see the below screen.
Step 6: Connect your device to Computer using USB Cable.
Step 7: Open the Xiaomi Flash Tool and click on
Step 8: Click on select and locate the firmware (that you have downloaded and extracted on your Computer).refresh to allow Xiaomi Mi Flash Tool to recognize your device.
Step 9: Choose either
clean all or save user data or clean all and lock at the bottom right corner. It depends on your choice, we recommend using clean allfor the clean install of the ROM and clean all and lock to install the firmware and lock the bootloader.
Step 10: Click on
[Download Here]flash to begin the flashing process. Once it is successful you will see a success message.
Post a Comment